What’s the Drywall Disposal Process?

The drywall disposal process begins with an assessment to understand the condition of the drywall and the environment it’s in. Depending on the hazards it contains, we need to adjust our approach to ensure safe handling and regulatory compliance. From there, the work moves forward in a controlled sequence.

Here’s what that involves:

1. Thorough inspection to identify date stamp on materials and material is all of the same type.
2. Or examine the hazardous material inspection report and material to ensure it doesn’t contain asbestos.
3. Haul material off site to a recycling facility.

Why You Shouldn’t Handle Drywall Debris Yourself

If you test for mold or asbestos and the results come back positive, the next step isn’t to simply tear out the drywall as you would in a standard demolition. Disturbing contaminated drywall without proper controls releases particles that can affect air quality and pose serious health risks.

You may also inadvertently spread the contamination to areas that weren’t affected before. If there’s asbestos, it’ll become friable, which means the fibers break apart easily and can linger in the air or settle on surfaces. With mold, it’s similar, only it’s the spores that are spreading.

When you hire us, we bring:

• An asbestos abatement license issued by WorkSafeBC
• Level 2, 3, and S certificates from WorkSafeBC for hazardous material work
• Safe removal and disposal of contaminated drywall

• Proper containment methods that meet regulations
• Licensed transport for hazardous waste

When Should You Hire a Professional for Drywall Waste Removal?

You can hire us any time you suspect your drywall could contain asbestos or hidden mold. Even when it’s not visible, emergencies can and often do develop from minor disturbances. We know how to test, confirm what’s there, and remove it without putting the rest of the site at risk.

This is especially important if you’re planning major construction or renovation work that could break through older walls or ceilings. You don’t want to run into problems halfway through a project. Proper handling at the start keeps the work on track and protects everyone on site.

If your drywall has been damaged by leaks or prolonged moisture, it’s also wise to bring us in before mold has a chance to move deeper into your space. We contain the problem, clear it out safely, and handle disposal so you don’t have to second-guess the cleanup.

DRYWALL Waste

Drywall waste is messy, heavy and hard to get rid of. We make it easy for contractors to clean up their construction sites and get rid of all their drywall off cuts or other debris from renovations or restorations on buildings newer than 1990.

What happens to drywall?

Once the drywall reaches the recycling facility it is crushed up and the paper and other contaminates removed and it is either made into new drywall or used in farming to enrich poor soils.

Why Choose Scott Asbestos’ Drywall Removal Service?

Our drywall removal service is backed by extensive training and strict WorkSafeBC certifications. You can trust us to manage contaminated drywall with care, compliance, and respect for your property.

With our team on site, you benefit from:

• Experienced professionals
• Adherence to environmental regulations
• Proper packaging, labeling, and disposal

• Extensive industry knowledge
• Reliable and responsible asbestos disposal

When Do You Have To Remove Mold in Drywall?

If drywall gets wet, mold can take over. If you notice circles of moisture on your walls or ceilings, there’s a good chance that mold is growing behind them. Whether the drywall needs to be removed will depend mostly on how far the contamination has spread and how long the material has stayed damp.

For example, we’ve seen cases where a slow leak behind a bathroom wall went unnoticed for months. By the time the discoloration appeared, the mold had already spread through multiple panels and softened the drywall from the inside. In situations like this, removal is required. The affected material can't be salvaged, and leaving it in place risks spreading spores to surrounding areas.

Is Asbestos in Drywall Common?

Asbestos can be found in certain components of drywall, including joint compound, tape adhesives, or the wallboard itself. It’s not quite as common as it is in insulation or ceiling materials, but it still shows up often enough to require caution if you’re planning to renovate or demolish.

You can’t identify the presence of asbestos in drywall at a glance. Professional testing is required, which will involve collecting a small sample and analyzing it under controlled conditions. If asbestos is confirmed, we follow strict procedures to remove the drywall safely and contain any potential spread.

How Long Does It Take To Remove Drywall?

We plan every project to fit the building's condition and the client's needs, with clear steps in place to keep the work moving. We know you want to continue with renovations or repairs as soon as possible, so we aim to complete each removal without unnecessary delays.

The time it takes depends on how much drywall needs to come out and how easily we can access the area. A single wall section can often be cleared in a few hours, but larger jobs that involve multiple rooms or structural features naturally take more time. We also factor in site layout and any other materials that may need to be removed first to reach hidden drywall.

After an assessment, we can provide a more accurate estimate of how long the work will take. This allows you to plan your project with clear timelines and gives our team the information needed to set up proper containment and keep everything on track.

Are There Rules for Proper Drywall Recycling?

There are specific rules that govern how drywall must be recycled, and they vary depending on the specific municipality and the condition of the material. If the drywall contains asbestos, mold, or other contaminants, guidelines determine how it must be handled, disposed of, and even transported.

Some of these rules can include separating painted drywall from clean offcuts, limiting the amount of paper facing allowed in recycling loads, and requiring asbestos testing before disposal at designated facilities. In some areas, mold-affected drywall must be treated as restricted waste.

We follow all guidelines for drywall recycling, with procedures in place to manage both hazardous and non-hazardous materials. We hold a license from the Ministry of Transportation to transport hazardous waste, and that authorization ensures every load is moved and documented correctly.