Asbestos Mitigation in Vancouver

If asbestos is present, it’s not a matter of if it will become a problem—it’s when. Once disturbed, microscopic fibers become airborne, turning a routine project into a hazardous one. Testing and mitigation before work begins are the only ways to stay ahead of the issue.

Scott Asbestos And Hazardous Material Removal Ltd doesn’t just remove asbestos—we make sure it never becomes a risk in the first place. Whether you’re planning renovations or dealing with an unexpected discovery, we provide thorough inspections, safe containment, and complete asbestos mitigation for your Vancouver property.

Stay ahead of the problem—call (604) 472-7499 to schedule a free initial consultation.

Who Is Qualified To Mitigate Asbestos?

Asbestos mitigation requires adherence to strict safety protocols to prevent fiber release and contamination. Without proper handling, disturbances can spread hazardous particles, increasing exposure risks rather than eliminating them. That’s why only trained professionals should handle the job.

Our qualified asbestos abatement professionals can safely assess, contain, and remove asbestos. We follow legal requirements and use protective equipment. Our entire team is extensively trained to ensure every step is handled without risk to workers or occupants.

Qualifications we have include:

WorkSafeBC Asbestos Abatement License: Ensures compliance with provincial safety regulations for handling and removing asbestos
License to Transport Hazardous Waste: Certified by the ministry to legally transport asbestos-containing materials for proper disposal
Extensive industry experience: Years of hands-on work in asbestos mitigation, following strict safety and regulatory protocols

How Do Professionals Avoid Disturbing Asbestos Fibers?

Without the right precautions, asbestos fibers can become airborne, especially if materials are already damaged or deteriorating. Every mitigation project requires strict adherence to a carefully planned approach to prevent fiber release and exposure.

One way we prevent fiber release is by constructing containment units using rip-proof poly sheeting. These sealed enclosures isolate the work area, preventing asbestos from spreading to unaffected spaces while ensuring a controlled and safe removal process.

To prevent releasing fibers, we also use:

Negative air units to create continuous airflow, pulling contaminated air through HEPA filters to prevent fiber escape
Misting and wet methods to keep asbestos materials damp to reduce dust and prevent airborne fiber release
HEPA-filtered vacuums to safely capture asbestos dust and prevent recontamination during cleanup
Strict entry and exit protocols to limit access to the mitigation area, reducing the risk of fiber spread

Scott Asbestos And Hazardous Material Removal Ltd Is Licensed To Handle Asbestos

Our licensed team follows strict regulatory standards for safe asbestos containment, removal, and disposal. With certified training and compliance expertise, every project is handled efficiently.

We handle asbestos mitigation according to:

Regulations for worker safety
Provincial and federal hazardous material handling laws
Ministry requirements for hazardous waste transport
The best industry practices for minimizing fiber release during mitigation
Strict disposal protocols at approved hazardous waste facilities
Required protective equipment and decontamination processes for workers

When it comes to asbestos mitigation, expertise and compliance are critical. Our team’s qualifications, experience, and commitment to safety ensure that every project is handled with the highest level of care.

Is Asbestos Sampling Always Required Before Mitigation?

We perform asbestos sampling before mitigation to confirm whether materials contain hazardous fibers and to determine the safest approach for handling them. Without proper sampling, materials can go untested, leading to unnecessary removal—or worse, leaving hazardous asbestos in place.

We collect samples from materials most likely to contain asbestos, like insulation, drywall, ceiling tiles, and flooring. We then verify fiber content and assess the material’s condition and risk level. High-risk areas, like deteriorating surfaces, are primary sampling zones.

If sampling confirms asbestos is present, mitigation efforts can be tailored to the risk level. Low-risk materials in good condition may be sealed or left undisturbed, while high-risk materials, like deteriorating insulation, require full removal under strict safety protocols.

Can You Perform an Asbestos Assessment on Inaccessible Areas?

When materials in inaccessible areas can’t be safely tested, they’re treated as asbestos-containing materials by default. This precaution ensures that no hazardous fibers are accidentally disturbed during construction or mitigation work, preventing unnecessary exposure risks.

Regulations require that suspected asbestos-containing materials remain undisturbed or are handled with full safety measures until proper sampling can be conducted. Likelihood can be inferred based on similar materials found in the building. If testing later confirms the absence of asbestos, mitigation plans can be adjusted.

Is Mitigation Possible for Asbestos in Drywall?

Drywall can contain chrysotile asbestos in the joint compound, texture coatings, or even the drywall itself. Compared to other materials, drywall can be more fragile and easily damaged. If it’s cut, drilled, or otherwise disturbed, it releases those fibers into the air.

The safest way to mitigate asbestos in drywall is through full removal under controlled conditions; containment alone isn’t often safe. We can seal the area, use negative air pressure, and carefully take down the drywall in large sections to minimize fiber release, ensuring safe disposal.

Does Mitigation Completely Remove Asbestos Exposure Risks?

Mitigation doesn’t always mean full removal—some asbestos-containing materials can remain safely in place if properly sealed and contained. The goal of mitigation is to eliminate the risk of fiber release, ensuring the material poses no harm, whether through encapsulation, enclosure, or full removal.

For example, if we find asbestos in undamaged ceiling panels, encapsulation with a specialized sealant can prevent fibers from becoming airborne. In other cases, like deteriorating insulation, complete removal may be necessary to eliminate the hazard. The method we use depends on the risk level.

Even if asbestos remains in your building, strict containment measures prevent future disturbances from releasing fibers. Our professional, licensed mitigation also includes sampling, proper disposal, and compliance with safety regulations to ensure exposure risks are completely eliminated.

Eliminate Asbestos Hazards by Calling Now

Asbestos hazards are a serious health issue. The first step in preventing contamination is a risk assessment that identifies hazardous materials before they’re disturbed.

With proper mitigation from Scott Asbestos And Hazardous Material Removal Ltd, asbestos-containing materials can safely be removed or contained, ensuring a safer environment for everyone.

Looking for asbestos mitigation in Vancouver? Contact us at (604) 472-7499.